TIG Welder ESAB Origo Tig 4300iw TA24 AC/DC

ESAB Origo Tig 4300iw TA24 AC/DC TIG Welder

For demanding TIG welding applications

• Designed for high-quality TIG welding
• QWave™ – enables AC welding with a stable arc and significantly improved noise characteristics.
• AC frequency and balance control optimizes the weld pool.
• DC pulsed TIG welding enables easy control of heat input.
• ESAB Logic Pump, ELP, ensures automatic start of the water pump when a water-cooled welding torch is connected.
• Energy-saving mode – fans and pumps run only when necessary.
• ESAB 2-program function. It is possible to change the program during welding.
• Easy to operate. All parameters are presented in a simple and understandable way.
• MMA (stick) welding in AC and DC mode - Hot Start, arc force, and polarity switching (DC).
  

Scope of delivery:

ESAB Origo Tig 4300iw AC/DC, TA 24 AC/DC 0460100880 incl. gas hose and earth cable

4-wheel trolley 0458 530 881

Description:

Engineered for high quality requirements
The Origo™ Tig 4300iw AC/DC welding power source
ensures a stable arc, in both AC and DC modes.
In AC mode, aluminum, aluminum alloys, and magnesium alloys can be welded.
Stainless steels, non-alloy steels, and copper alloys can be processed in DC mode.
AC welding with QWave™
One of the most important functions of
TIG AC power sources is ensuring a
stable arc. QWave™ technology
optimizes welding properties. The result is
an arc that remains quiet and stable even with increased oxidation of the
material surface.
The device features the True AC Rating function,
which ensures that the set parameter group always corresponds to the
actually set welding current.
Especially with long torch cables.
Easy operation
Origo™ TA24 AC/DC has all the necessary
functions required for TIG AC/DC and MMA AC/DC
welding, clearly arranged on
an easy-to-understand control panel.
With AC balance, the penetration depth can be controlled;
AC frequency regulates the arc width.
Furthermore, the device has a setting
to control electrode preheating, which can be used to influence the
bead shape (ball formation in the AC range),
thereby increasing the service life of the electrode.

Specifications

Setting range TIG AC/DC 4 - 430
Setting range MMA 16 - 430
Mains voltage, V/Ph 400/3
Fuse C MCB, A 25
Mains power, Ø mm2 4 x 4
Max. output DC/AC
at 40% duty cycle, TIG, A/V 430/27.2
at 60% duty cycle, TIG, A/V 400/26
at 100% duty cycle, TIG, A/V 315/22.6
Slope up, sec 0-10
Slope down, sec 0-10
Gas pre-flow, sec 0-25
Pulse frequency DC, sec 0.01-2.5
Frequency AC, Hz 10-152
AC balance, % 50-98
Open circuit voltage, V DC 83
Energy-saving mode, W 75
Power factor at 100%, TIG 0.89
Ambient temperature, C -10 to +40
Continuous sound pressure at idle, db (A) < 70
Efficiency at 100%, TIG, % 76
Protection class IP 23
Insulation class (main transformer) H
Standards: IEC/EN 60974-1, -3, -10
Dimensions mm, LxWxH 625x394x776
Weight, kg incl. cooling unit 95
Cooling unit Integrated
Cooling capacity, kW, l/min at 40 C 2.0/1.0
Coolant content, l 5.5
Max. flow rate, l/min 2.0
Max. pressure, 50/60 Hz bar 3.4 

Ordering information for accessories: (Not included in delivery)

Coolant (10l canister) 0007 810 012
Options:
Multi-voltage module TUA2, mountable under unit
(for 3x208/230/400/460/475/575 volts, 50/60 Hz) 0459 145 880
Handle kit for separate installation
of the multi-voltage module (complete set = 2) 0459 307 881
Hand remote control AT 1 CAN 0459 491 883
Hand remote control AT 1 CoarseFine CAN 0459 491 884
Foot remote control T1 Foot CAN incl. 5 m cable 0460 315 880
Remote control cables for AT1:
5 m CAN 0459 554 880
10 m CAN 0459 554 881
15 m CAN 0459 554 882
25 m CAN 0459 554 883